Door Sizes

Door Sizes  Walk-In cooler and Freezer door sizes

Simpson Coolers walk-in coolers or freezers come standard with a 34” x 78” door. The door can be hinged left or right. A variety of common sizes are listed on the chart.  Other special sizes are available upon request.

Cooler and Freezer Lights

Vapor Proof Lights

Simpson Coolers doors come standard with one (1) vapor-proof light fixture shipped loose. The fixture has a shatter-proof globe that allows the use of a 100 watt incandescent lamp. Light bulbs are provided by the end user. When a cooler or freezer has more than one (1) door and a three (3) way light switch is needed, we will furnish the 3-way light switches at your request.

Also available are wire guards that protect the shatter-proof globe.

Fluorescent Lights

Fluorescent lights are available in four foot lengths and provide a pleasant diffused light that emits fewer shadows than a standard vapor-proof incandescent light. Simpson Coolers  fluorescent lights will operate in temperatures to –20 Fahrenheit. When a specific foot candle of light is required Sijmpson Coolers will recommend the proper amount of lights to do the job. Fluorescent tubes are provided by the end user.

Walk-In Cooler and Freezer Options

Door Kick Plates  Cooler Kick Plates

Interior and exterior kick plates are available for all door sizes. The standard height for the kick plate is 34”. Different heights are available to suit your particular needs. The door protector is available in 1/8” aluminum diamond plate or 22 gauge smooth non-polished stainless steel (type 304 2B finish).

Door Drip Caps

A metal drip cap is available for all coolers and freezers that are installed outdoors. The drip cap diverts rain and snow from the door opening. The hood is field installed with sheet metal screws.

Wall Bumper Guards  Cooler wall bumper guards

Wall bumpers can be used anywhere there is need for protection. The most common place is on the walls that are subject to abuse from heavy cart traffic. They are useful when heavy beer kegs are stored inside the walk-in. There are many different styles of bumper guards available for cooler and freezer from  Simpson Coolers.

Walk-In Cooler Door Add-ons

Walk-in Cooler additional options and accessories are frequently requested.  Add-on accessories range from simple items to sophisticated, including state-of-the-art temperature and humidity recording devices. If you have a special need, please contact us, we’ll be glad to help.

Deadbolt Handle Latch  Deadbolt Handle Walk-In Coolers

When added security is necessary a deadbolt handle latch can be installed. The deadbolt handle latch can be activated by a finger slide from the outside and locked by key in an open or closed position. A twist-off knob disassembly is installed on the inside which eliminates the possibility of being locked inside the walk-in.

Vision Ports  Walk-In Cooler Vision Port

Vision ports give you the ability to see inside the cooler or freezer without opening the door. Vision ports come in two sizes, 14” x 14” and 14” x 24”. Low temperature walk-ins require the vision port to have a heater around the perimeter. A heater is not necessary in a cooler unless it is located in a high humidity area.

Padlocking Hasp with Inside Release  Padlocking Hasp for Walk-In Cooler

When added security is necessary, the locking hasp is an excellent way to achieve that security. The locking hasp conforms to OSHA codes that require a safe and easy inside safety release.

Door Standards (cont.)

Walk-In Cooler Door Closer  walk-in cooler door closer

A hydraulic door closer is standard on all doors 42” in width or less.

Pressure Relief Vent (Freezer Only)  Freezer Vent

The pressure relief vent is designed to equalize the pressure between the inside and outside of the walk-in freezer. The relief vent has a low wattage heater that is pre-wired at the factory and is designed to prevent frost build-up and condensation. Simpson Coolers carries 3 sizes of vents to accommodate any freezer.

Threshholds

Simpson Coolers standard threshold is made of 1/8” aluminum. All freezers have a threshold, even if the freezer does not have a Simpson Coolers furnished floor. When the cooler has a floor, a 1/8” aluminum threshold is furnished. When the cooler does not have a floor, a threshold is not needed and is not furnished unless requested.

Door Standards

Door Gasketswalk-in cooler Door Gasket

The door gasket is a vinyl material with a heavy-duty magnet that adheres to the metal on a door frame. The gasket design allows for quick and easy replacement in the event the gasket should ever need to be replaced.

Bottom Sweeps  walk-in cooler bottom sweep

In most models the bottom sweep is a double wiper gasket that is installed on the bottom edge of the door. This allows the gasket to just barely sweep the building floor. Upon installation, the gasket is easily adjusted using a screw driver. In models with a Simpson Cooler floor, and flush door or interior/exterior ramp the gasket is installed to sweep against the threshold.

Switch and Pilot Light  walk-in cooler switch and pilot light

The pilot light and light switch are located on the latch side of the door section.  The pilot light alerts personnel when the inside light is on. The switch and pilot light are covered with a stainless steel cover plate and are field installed.

Door Standards, Latches

Door Latch walk-in cooler door latch

All doors 42” in width or less are designed to be self-closing using a brushed chrome positive seal latch with keyed cylinder lock and strike plate with inside safety release.  Contact Simpson Coolers for larger self closing doors.

Cam Lift Hinge  Cam Lift Hinge

Simpson Coolers standard hinges are cam lift, with a spring assist closing mechanism on all doors 42” in width or less. The hinge is die cast zinc with a brushed chrome finish and self-lubricating nylon cam.

Inside Safety Release  Walk-In Cooler Safety Release

The inside safety release prevents accidental entrapment inside the cooler or freezer even if the handle is locked or padlocked from the outside. A simple push on the inside plunger will release the handle and allow a quick escape.

Walk-In Cooler Thermometers

Our In-Stock Walk in Cooler standard thermometer is a 2” dial thermometer that is NSF Certified and is very dependable and accurate. Some customers desire a different type of thermometer and a wide variety or thermometers are available. These range from a relatively inexpensive digital thermometer to a very sophisticated digital thermometer with a temperature alarm.

walk-in cooler thermometer

The digital thermometers can be ordered with or without a battery backup.

 

In-Stock Walk-In Coolers and Freezers

Simpson Coolers uses only top brand name accessories of the highest qualtiy.

See Walk-In Cooler features available with In-Stock Coolers. Additional accessories are also available.

If you have a special need that is not listed, please let us know and we will make every effort to accomodate your application.

Walk-In Cooler Inventory

Quick Ship, In-Stock sizes include:

SIX: 6' x 6' , 6' x 8' , 6' x 10'

EIGHT: 8' x 8' , 8' x 10', 8' x 12'

TEN: 10' x 10', 10' x 12'

TWELVE: 12' x 12'

Walk-In Cooler and Freezer Inventory

Quick Ship Walk-In Cooler Specifications

  • Stucco galvanized finish inside and out

  • Lag down ceiling

  • One 34' x 78' self-closing, overlap door

  • Mounted light switch

  • Vapor proof light fixture

  • Dial thermometer